Reference: 22440
Brand: Hornady
Reference: MTM-P-100-9-10
Brand: MTM-Caseguard
Reference: 2635
Brand: Hornady
Reference: 90783
Brand: Lee
Reference: 4PL6018
Brand: Lapua
The AWP expander mandrel will smooth out and slightly expand the case neck so the brass will be ready for consistent neck tension.
New Updated model to accommodate all presses including Forster CO-AX
Commercial die manufacturers have no set standards for the Expander ball in their dies. Large variations from manufacturing to manufacturing and even within a given manufacturing makes it necessary to properly size the inside diameter before seating. This is where our expander mandrel comes in.
The AWP expander mandrel will smooth out and slightly expand the case neck so the brass will be ready for consistent neck tension. We have found this is the easiest method to greatly reduce your extreme spread (ES) and standard deviation (SD) numbers.
We recommend removing the expander ball completely from your resizing dies. Your last step before adding powder will be to expand your necks using the appropriate expander mandrel. We recommend using Imperial Sizing lube when using the mandrels, a little bit goes a long way. We use a single stage press to seat the primers and then expand the necks on the down stroke, then we pack the “ready for powder” brass into our APW reloading trays.
The Die body fits your Normal Reloading press and the interchangeable Mandrels are sized to precise dimensions. The kit includes mandrels for running 0,001 or 0,002 neck tension as well as a base to keep everything in place while not in use.
The complete expander mandrel set includes:
224Cal
243 Cal (6mm)
264 Cal (6.5mm)
284 Cal (7mm)
30 Cal (308)
338 Cal
Specific References
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: SCTC-65CRM
Brand: Sudami
Reference: 7832333
Brand: Lyman
Reference: 7821987
Brand: Lyman
Reference: 91330
Brand: Lee
Reference: 7631326
Brand: Lyman
Reference: 7631394-4.5lb
Brand: Lyman
Reference: 91976
Brand: Lee
Reference: NR1277
Brand: Forster Products
Reference: PA1000
Brand: Forster Products
Reference: 7862000
Brand: Lyman
Reference: 90673
Brand: Lee
Reference: 041224
Brand: Hornady
The AWP expander mandrel will smooth out and slightly expand the case neck so the brass will be ready for consistent neck tension.
New Updated model to accommodate all presses including Forster CO-AX
check_circle
check_circle
